## Monday, February 11, 2019

### another mathematical rabbit hole

Above is a single warped square made into an earring, and another earring with 2 of them.  I said my way of working  gives me more flexibility, but on the other hand my "stock" lengths are sort of set to be able to build right triangles. For example, I cut lengths of 10, 14, 20, 28 and 40 mm. Each one is more or less the one before it times the sq root of 2. So 10/10/14 makes a  right triangle ( or would except that the sq root of 2 isn't 1.4 but 1.4xxxx to infinity), as does 14/14/20 or 20/20/28 etc.  I also do 17, 24 and 34mm lengths, which fill in the gap and work the same way.  But to jump to 14/14/24 makes a very warped square,
(similar to what's in the earrings, which use triangles of 10/10/17) and more than I wanted.  So I decided to try making squares where just one of the outer edges was 24 and the rest were 20s.Here's a double row of these squares.

I liked it, and thought it could make a good bracelet ( you can see on the left end an additional structure I added where I could put a clasp). But there was 1 problem.  There are 2 versions of the square.  If you arrange the "plane" so that the tube on the bottom is horizontal, the tube on top can either go from high on the left and low on the right or vice versa.  Since the triangles are theoretically rigid you can't change it once it's made. In this way it's different from the peyote triangles which are inherently flexible. In the top pic I arranged the squares so that each is the mirror image of the ones beside it, which is the way it would have to be for a bracelet.  But since the hyperbolic-ness ( hyperbolicity? no idea what the proper word is) is fairly minimal, if you push on one of the high points in the center of the structure you can flip it, and then it turns into pic 2.  You can just as easily flip it back, but a potential customer wouldn't know that and I didn't want to get bogged down in long explanations. So I changed it, making essentially warped rectangles, where the outside edges were 2 20s and 2 24s.  That made the bumpiness more extreme and hence more stable.
I also tried a structure where the warped squares didn't go back and forth between the 2 versions, but were all the same version.  That made the warping spiral.  That's the last picture, but you can't see what's happening very well. In order to make it work, I'd need to replace 1 tube in each square with a gold or colored one so that you could see it spiral around.
There's another way to make a hyperbolic plane. Instead of adding length to the tubes that make the perimeter of the structure you can add an extra triangle, i.e, where 4 right triangles would make a flat square, 5 of them would make a hyperbolic pentagon.  That's the sort of structure that will get progressively more wavy in the way of a lettuce leaf.  But doing it with 5 right triangles was too extreme.  Each pentagon was very non-flat. And if the first row had n structures the next would have 2n, and then 4n etc.  Again too  extreme and fast a progression.  I did it several years ago (you can see it in a post on hyperbolic planes from that time) using equilateral triangles, and where 6 would make a flat hexagon, 7 makes a hyperbolic heptagon. And each row will have 4 units for every 3 units in the one before, so the progression is still fast, but not so very fast. I really liked the one I did in colored glass beads back then, but had some trouble with the glass cutting the thread. I'd like to try one in silver tubes, possibly bright silver, but haven't gotten it done yet.

## Wednesday, January 23, 2019

### new piece after a hiatus

It's been quite a while since I've posted anything here. First there were 2 months on a canal boat in England. Then I came home at the end of October to the aftermath of hurricane Michael.  By the time I got back to Panama City the roads were mostly clear, and we had power and water.  But our house, though liveable, has holes in 1 wall which are only covered with plastic.  Also until a week or so ago we didn't have internet, except for slow data on our phones.  Finally, my computer crashed, taking with it all my jewelry pics as well as the copy of Photoshop that I had used to edit them.  So I've had to learn to use Gimp, which is open-source.  I'm pretty sketchy at it, but I finally got a picture of a piece I like.
I decided to think back over the last 4 or 5 months, pick my favorite piece from that period, and post a picture of it.This is it.  It's done mostly in RAW ( I guess it's technically CRAW, but since that's the only kind of RAW I ever do I don't usually specify it).  But I wanted to break it up, make it less regular than I usually do in my RAW pieces, and I was quite pleased with the way it came out.  I hope you like it. As I get more pictures "gimped" I'll try to post some.  It feels good to get back to normal in one more way.