new collar with gold

I love this piece!  A few posts ago I talked about using some long beads on the outside of one of these collars and how it made the outside edge scallop. I had done it with stone and marble beads and didn't like the mix, but mentioned I might do it with gold tubes. Just finished this one and I really like it. I'm doing more these days with the gold (actually gold-filled) tubes as accents. and I think the contrast with the dark silver really works. For my own use, I mostly stick to the plain oxidized silver pieces, as they're less dressy, as is my lifestyle. But I do like making these silver and gold pieces. They tend to be simpler, and less funky, because when I piece has lots of different shapes and structures, then I think the contrasting color is  distraction.  But it makes a more classic piece pop.
By the way, after writing the earlier blog post about this structure, I forgot to read it before making this piece, and so had to redo it  after getting around 1/3 of the way around.  In the post the dark tubes were 28mm and the stone tubes on the outside edges were 20-35-20.  In this one I started out using all 28s except for the long 35mm ones on the outside, so no 20s on the outside.  That made the outside too long relative to the inside, so it curved was too tightly to fit your neck into it. So I changed the inside tubes to 31mm.  It's still a pretty tight circle.  If I wanted it a bit longer, instead of round, I'd make2 of the inside tubes in each side 35s instead of 31s.  That would add a bit more length, but mostly it would make the curve shallower at that point. There are 12 inside tubes, so I'd change 3,4, 9 and 10. Actually I might just change 3 and 10 (talking to myself here) because you really want to do it when the line of the necklace is 90 degrees from the center point, so you're making it just longer, not wider.